Install the door handle

If you intend to install a smart lock handle to the door, see Install the smart lock handle.

  1. Remove the protective plastic on the inside of the door.
  2. Push the handle with the spindle attached to it into place on the outside of the door.
    Pierce the plastic in the lock case with the spindle.
  3. Push the second handle into place on the inside of the door.
  4. Install an M5x46 screw in the hole at the center of the handle from the inside of the door.
    Note: Check that the cover plate is positioned straight.
  5. Install M5x46 screws (2 pcs) in the vacant holes from the inside of the door.
  6. Tighten the set screw on the inside handle.
    The resistance increases steadily until the screw pierces the spindle. You can feel the resistance stop when the set screw pierces the spindle.
    Note: In the final position, the head of the set screw is slightly above the handle surface.