Moving the pod (optional)

Remove all loose furniture if any present. Remove the floor threshold, the floor grid, and the carpet.
Warning: Risk of injury. Do not go into the pod when it is standing on the wheels.
  1. Screw in the feet of the leveling screws (8 pcs) with a long 7 mm T-handle socket wrench, so that the pod stands on the wheels. You can also use a flat-head screwdriver.
  2. Carefully push the pod to the new location.
    Note: Only push the pod below the vertical middle, do not tow it.
    Note: Only move the pod at walking speed.
    Note: Only move the pod on even surfaces. The pod can cross thresholds a maximum of 3 mm.
  3. Screw out the feet of the leveling screws (8 pcs) gradually with a long 7 mm T-handle socket wrench. You can also use a flat-head screwdriver.
    Make sure that the leveling feet are past the wheels and lightly touching the floor. The feet of the leveling screws are against the floor when you feel resistance.
  4. Level the floor and screw out the feet of the leveling screws to their final position. Measure the opposite points with a spirit level repeatedly and adjust the feet of the leveling screws gradually.
    Only screw the feet of the leveling screws outward, to make sure that they all stay past the wheels.
  5. Install the floor threshold, the floor grid, and the carpet.