Level the floor

  1. Screw out the feet of the leveling screws (8 pcs) with a 4 mm hex key or 6 to 7 mm flathead screwdriver.
    Note: Make sure that the feet of the leveling screws are past the floor board.
    Note: If the optional casters are installed, make sure that the feet of the leveling screws are slightly past the casters or that the casters cannot rotate.
  2. Measure the floor module with a spirit level at six measuring points:
    • On top of the walls on the right-hand and left-hand sides
    • On the ABS strips at the edges of the floor modules
    Measure opposite points repeatedly and adjust the feet of the leveling screws gradually.
    Only screw the feet of the leveling screws outward to make sure that they stay past the casters (optional).