Install the power unit

  1. Make sure that the ON/OFF switch of the power unit is in the "I" position.
  2. Place the power unit with the converter in the free space in the floor module next to the small piece of acoustic panel.
    Place the power unit closer to the center joint.
    Note: Make sure that the power unit and the converter do not block any ventilation openings.
  3. Connect the power cord to the power unit.
    Tip: The power unit AC connector has a locking mechanism. To bypass the locking mechanism, tilt the connector of the AC power cord first down and then up.
  4. Connect the DC extension cord to the DC connector of the converter.
  5. If installing the optional booking system bracket or the optional wireless charger, connect the 5V unit cord between the DC extension cord and the DC connector of the converter.
  6. If installing the optional booking system bracket, connect the customer supplied USB cord to the USB connector of the 5V unit.