Install the power outlet

  1. Place the power outlet onto the fixing plate at the bottom of the table top.
  2. Turn the power outlet counter-clockwise until it locks into place.
  3. Lead the power outlet cord through the opening at the base of the table leg.
  4. Connect the power outlet cord to the power unit.
    A "click" sound is audible when the connector locks into place.
  5. Feed the power outlet cord into the groove in the table leg.
    If the table is equipped with a wireless charger, also pull the excess cord of the wireless charger into the groove in the table leg.
  6. If the optional wireless charger is installed, lead the USB cord from the wireless charger through the opening at the base of the table leg.
  7. If the optional wireless charger is installed, connect the USB cord to the USB connector of the 5 V unit.
    Note: If both the booking system bracket and wireless charger are installed, connect the wireless charger cord to the USB connector on the power outlet.
  8. Install the small cover board with 4x20 screws (2 pcs).
    Note: Make sure that the cords are not pinched or damaged
  9. Press the rubber strip onto the table leg.