Install the power cord from the floor

If installing the power cord from the floor, follow these instructions. If you intend to install the power cord from the roof, see Install the power cord from the roof.

Choose which side of the floor you want to install the power cord to. The following instructions show installation from the right-hand side.

  1. Unscrew the 4x20 screw (1 pcs) and remove the cover plate at the foot of the right-hand side wall. Set the screw and cover plate aside.
  2. Feed the power cord through the opening on the outside of the floor.
  3. Feed the power cord along the electrical pipe and through the opening in the center joint.
    Note: Make sure that only 4.5 m (15 ft) of the cord is left ourside the pod, loop the excess into the floor.
  4. From inside the pod, feed the DC extension cord into the electric pipe in the ceiling and down to the opening in the floor.
  5. At the opening, feed the DC extension cord into the electric pipe in the floor and through the opening in the center joint.