Install the door

  1. Detach the halves of the hinges from each other.
    Note: Do not peel off the black tape from the hinges. The tape is needed to protect the glass parts from the metal hinges.
    Note: Make sure that the washers stay in place when detaching the halves of the hinges.
  2. Install the 1 mm adjustment plate into the lower hinge mounting hole and attach half of both hinges with M6x30 Taptite screws (4 pcs each). Use a hand tool.
    Note: Do not use power tools to install the hinges.
    Note: Only install the adjustment plate under the lower hinge.
    Note: Make sure that the seal is not squashed between the hinge and the door frame.
  3. Install the remaining halves of the hinges to the door with M6x30 Taptite screws (4 pcs each). Use a hand tool.
    Note: Do not use power tools to install the hinges.
    Note: Peel back enough of the protective plastic to install the hinges. Do not remove the protective plastic completely.
  4. Lift the door into place in the open position (~130°).