Install the control unit

  1. Insert the control unit bracket into the back of the control unit.
  2. Turn the bracket into place.
  3. Install the bracket with the control unit into the opening in the ceiling with 4x30 screws (2 pcs).
    Note: Make sure that you install the control unit to the right-hand side of the center beam.
  4. Connect the DC extension cord to the PWR IN connector.
  5. Connect the nearest fan power cord to the FAN 1 connector.
  6. Lead the second fan power cord through the groove in the center beam and connect it to the FAN 2 connector.