Install the upper frame

  1. Turn the upper frame onto the edge of the glasses and push the frame into place against the roof.
    Note: Make sure that the glasses stay aligned while installing the upper frame.
  2. Install the upper frame with M8x60 bolts (2 pcs) and M8 washers (2 pcs) at the small openings and with one M8x35 bolt and M8 washer at the center opening.
  3. Tighten the nylon screws (2 pcs each side) on the sides of the back of the pod with a flat-head screwdriver.
    When tightening the nylon screws, lightly push the glasses from the outside to make sure they settle closer to the inner edge of the frame groove.
    Note: The glass adjustment screws are only for stiffening the glass structure. Tighten the screws until you feel resistance, then loosen half a turn. Do not overtighten.