Check the connections to the power unit and table control unit

Warning: Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
  1. Remove the plug from the power outlet.
    If equipped with the optional LAN, also disconnect the LAN cord from the outlet.
  2. Remove the plastic trims from the techwall.
  3. Remove the wall body cover from the techwall.
  4. Check that the spiral cord is connected to the table control unit.
  5. Remove the screws from the power unit cover and open the cover.
  6. Check that the connection between the table control unit and power unit is secure.
  7. Check that the CAN splitter cord is connected to the power unit and spiral cord.
  8. Close the power unit cover and secure it with the screws removed earlier.
  9. Install the wall body cover.
  10. Install the plastic trims.
  11. Connect the power cord.
    If equipped with the optional LAN, also connect the LAN cord to an outlet.
  12. Reset the table. See Reset the table.