Check the connections of the internal power cord

Warning: Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
  1. Remove the plug from the power outlet.
    If equipped with the optional LAN, also disconnect the LAN cord from the outlet.
  2. Remove the plastic trims and the wall body cover from the techwall.
  3. Remove the screws from the power unit cover and open the cover.
  4. Check that the internal power cord is connected to the power unit.
  5. Close the power unit cover and secure it with the screws removed earlier.
  6. Check that the external power cord is connected to the internal power cord.
    Note: If the power cord is installed from the roof, the connector is located near the roof.
  7. Install the wall body cover and the plastic trims.
  8. Connect the power cord.
    If equipped with the optional LAN, also connect the LAN cord to an outlet.
  9. Reset the table. See Reset the table.