Check that the CAN cord is connected to the control hub

Warning: Always disconnect the pod from the power outlet before you begin disassembly, maintenance, moving, or any other procedure.
  1. Remove the plug from the power outlet.
    If equipped with the optional LAN, also disconnect the LAN cord from the outlet.
  2. Remove the fan cover.
  3. Check that the CAN cord is connected to the CAN connector of the control hub.
  4. Install the fan cover.
  5. Connect the power cord.
    If equipped with the optional LAN, also connect the LAN cord to an outlet.
  6. Reset the table. See Reset the table.