Adjust the horizontal alignment of the door

Both door hinges have spacers, a thicker (3 mm) spacer in the lower hinge and thinner (2 mm) spacer in the upper hinge. The pod installation package has a few extra 1mm spacers.

To adjust the horizontal alignment of the door, you can do the following.
  • Add one or more extra spacers to one or both hinges.
  • Remove the spacer from the lower hinge.
  • Replace one or both existing spacers with thinner ones.
  1. Remove the protective caps from both hinges.
    Note: Do not use sharp tools to remove the caps. The frame scratches easily.
  2. Loosen the screws from both hinges.
    Note: Do not remove the screws.
  3. With the door in the open position, slightly pull the door away from the pod chassis.
  4. Remove or add a spacer to the hinges.
  5. Tighten the hinge screws.
  6. Install the protective caps.