Install the cylinder and sprinkler

Note: Make sure that the piping or the sprinkler head is not damaged during the installation.
  1. Guide the piping into the hole in the roof and place the cylinder onto the mounting rail.
    Note: Make sure that the piping is in the middle of the pilot hole.
  2. Tighten the rubber bands around the cylinder and secure them in place.
  3. Remove the protective paper from the sticker on the first rubber seal.
  4. Guide the rubber seal around the piping and attach the seal onto the roof body cover around the hole.
  5. Remove the protective paper from the sticker on the second rubber seal.
  6. Guide the rubber seal around the sprinkler head and attach the seal onto the ceiling felt around the hole.
  7. Install the sprinkler guard over the sprinkler.