Install the support beam to the wall modules (front)

  1. Unscrew the 4x30 screws (20 pcs) and remove the cover panels (8 pcs). Set the cover panels and screws aside.
  2. Stand one of the wall modules on the floor board and the other on the outside of the floor.
    Note: Make sure that the black ABS strips are on the outer side of the wall modules.
  3. Install one support beam on each side of the wall modules with flanged M8x50 bolts (4 pcs).
    The support beams extend past the sides of the wall modules.
    Warning: Support the walls continuously until the support beams are installed.