Install the control unit

  1. Insert the control unit bracket into the back of the control unit.
  2. Turn the bracket into place.
  3. Install the bracket with the control unit into the back opening in the ceiling with 3x12 mm screws (2 pcs).
    Note: Install the control unit on the right-hand side of the roof beam.
  4. Connect the converter cord to the PWR IN connector of the control unit.
  5. Connect the main power cord to the power unit.
    Tip: The power unit AC connector has a locking mechanism. To bypass the locking mechanism, tilt the connector of the AC extension cord first down and then up.
  6. If installing the power cord from the roof, guide the power cord to the roof.