Finalize the installation of the back frames and glasses
-
Tighten the nylon screws (2 pcs each side) on the sides of the back half of the pod
with a flat-head screwdriver.
Note: The nylon screws are only for pushing the glasses together. Tighten the screws until you feel resistance. Do not overtighten.Note: Make sure that the back glasses stay aligned and sit snugly in the H-profile seals when tightening the nylon screws.
-
Seal the whole frame with the wedge-shaped seal between the glasses and frames.
Note: Install the seal on the outside of the back half of the pod.Tip: Use glass washing liquid as a lubricant to help install the seal.